Shipyards and repairs · Spain

Marine refrigeration compressors and spare parts for Ferrol

Q: What should an enquiry for Ferrol include?

The enquiry for Ferrol focuses on specification and integration for newbuilding. Provide destination equipment, full reference, quantity and receiver. Keep technical requirements separate from delivery details and retain requested dates without interpreting them as already confirmed transport commitments.

Q: Can several vessels share an enquiry for Ferrol?

Yes, retaining vessel, circuit, model and serial number against every line. A shared part number does not prove that all executions are identical. Separate purchasing and receiving roles when material belongs to several customers, contractors or projects.

Q: Does location determine vessel electrical supply in Ferrol?

No. Use the vessel system plate and documentation, including voltage, frequency, phases and connection. The port country does not replace these data or determine the motor execution appropriate for a compressor intended for repair or replacement.

Q: What matters for condenser selection in Ferrol?

Identify model, execution, refrigerant and cooling water: direct seawater or an intermediate circuit. Add connections and dimensions. Material suitability and performance must be checked for the specific equipment rather than inferred from a marine label or delivery destination.

This guide for Ferrol, Spain, organises an enquiry around specification and integration for newbuilding. Separate the equipment function, intervention scope and receiving party. A compressor for a ship, yacht or workboat is identified by its nameplate and execution; location does not establish compatibility. Retain original references so engineering, purchasing and the receiver use the same information before a quotation is prepared. The destination provides a procurement context rather than an automatic recommendation of a replacement model.

Request a marine quotation →Ask about a part or send a nameplate

Installed equipment and intervention scope

For a documented project, link equipment to the approved list and record required documents before accepting an alternative. For Ferrol, the enquiry focus is specification and integration for newbuilding. Link each line to its circuit: provision storage, fish preservation, cabin air conditioning or another identified application. Give vessel name, internal equipment tag, package manufacturer, complete compressor model and serial number. A project covering several machines needs separate identifiers even when its parts share one enquiry. For new installation, the technical lead defines operating conditions and integration. For repair, identify the existing assembly and the component required. BITZER, BOCK, DORIN and FRASCOLD references are reviewed individually; similar power or appearance is not proof of interchangeability.

Spare parts, older models and alternatives

For a repair associated with Ferrol, retain manufacturer code, drawing position and quantity for each equipment item. A drawing position locates a part but may not be its supply reference. Older executions or modifications can change applicability. If the code is unknown, send photographs and describe the component function. For an obsolete model, keep the original and proposed successor distinct and ask the appointed engineer to review dimensions, connections and performance. Urgency does not remove identification checks. State which lines are essential to restore operation and which are intended for inventory, with deadlines and acceptance of partial supply clearly recorded.

Condensers, electrical supply and documentation

The project in Ferrol must distinguish vessel supply from the country’s shore grid. Check voltage, frequency, phases and connection on the actual plate. For a shell-and-tube condenser, state whether it uses direct seawater or an intermediate loop and retain the full reference. A marine product family does not automatically establish approval of each execution or the documents required by a project. Request technical sheets, drawings or specific certification before quoting. Also compare lubricant, protection, accessories and included components; a commercial photograph is not a specification of everything supplied with the selected reference.

Buyer, receiving point and required date

In Ferrol, the agent office, workshop and vessel may be different handover points. Identify the buyer, approval contact and physical receiver with a confirmed address and named contact. Give required date, project reference and whether partial receipt is acceptable. The receiver needs to accept the material and know whether it is a small spare-parts box or a heavy assembly. A quotation reviews availability, dispatch, freight and agreed scope; this page does not claim local stock or automatic berth access. The professional workspace can organise several customers and projects while keeping their receiving details separate.

Details to prepare the supply

Full model, serial number and circuit tag
Manufacturer part code, drawing position and quantity
Refrigerant, electrical execution and known operating conditions
Buyer, receiver, address and contact
Required date and requested documentation

Request a marine quotation →

Browse the catalogue by brand

Identify the installed equipment by its complete model. A brand appearing in the catalogue does not establish that every reference is suitable for a marine application.

FX3

Frequently asked questions for buyers and chief engineers

What should an enquiry for Ferrol include?

The enquiry for Ferrol focuses on specification and integration for newbuilding. Provide destination equipment, full reference, quantity and receiver. Keep technical requirements separate from delivery details and retain requested dates without interpreting them as already confirmed transport commitments.

Can several vessels share an enquiry for Ferrol?

Yes, retaining vessel, circuit, model and serial number against every line. A shared part number does not prove that all executions are identical. Separate purchasing and receiving roles when material belongs to several customers, contractors or projects.

How is an unknown part identified for Ferrol?

Attach the plate, component photographs and drawing position where available. Describe the component function and retain any older reference. Identification requires review before applicability is confirmed; visual similarity alone is insufficient to establish compatibility with the installed equipment.

Does location determine vessel electrical supply in Ferrol?

No. Use the vessel system plate and documentation, including voltage, frequency, phases and connection. The port country does not replace these data or determine the motor execution appropriate for a compressor intended for repair or replacement.

What matters for condenser selection in Ferrol?

Identify model, execution, refrigerant and cooling water: direct seawater or an intermediate circuit. Add connections and dimensions. Material suitability and performance must be checked for the specific equipment rather than inferred from a marine label or delivery destination.

Can an obsolete model be replaced for Ferrol?

Request documented comparison of the original and candidate. Performance, supply, dimensions and connections need checking. A successor reference may require mounting changes; retain acceptance by the responsible engineer before treating it as a direct replacement in the material list.

What must the receiver confirm in Ferrol?

Confirm material acceptance, address, contact and project reference. Distinguish receipt by agent or warehouse from transfer aboard the vessel. A city name is not a port-access permission or commitment to deliver directly to the ship during its call.

Are installation and commissioning included in Ferrol?

Material enquiries do not automatically include installation, yard attendance or commissioning. Define contractor responsibilities and the requested commercial scope. Any additional service must be expressly agreed with the relevant offer rather than inferred from a product page or port location.

Can urgent parts be separated from stock for Ferrol?

Yes. Give priorities, dates and acceptance of partial supply for each group. Retain verifiable references and quantities. Urgency can guide commercial review but must not remove the technical identification of a spare part and its destination equipment.

Which documents should be requested for Ferrol?

Specify a technical sheet, drawing, manufacturer documentation or particular certificate before quoting. Availability depends on the reference and execution. A marine family does not automatically establish every documentary requirement imposed by a project or its responsible engineer.

Can yachts and workboats be included in Ferrol?

Yes. Explain whether the circuit serves accommodation, provisions, fish or another function and supply the nameplate. Vessel size or type does not automatically select a compressor; each installation and spare part is reviewed against its actual conditions.

Is an enquiry an order in Ferrol?

No. This website collects identification and quotation enquiries. Availability and commercial conditions are subsequently confirmed with AACORE SUPPLY. A saved equipment record or earlier enquiry also does not, by itself, establish a verified purchase or an accepted order.

Availability, compatibility, transport and receipt must be confirmed for each enquiry. This location guide does not imply a local AACORE warehouse or repair service.

Other marine buying guides

Spain · English

Vigo

Prepare compressor and spare-part enquiries for Vigo: repair and traceability of installed parts, equipment identity and a confirmed receiver.

Read guide →

Spain · English

Cartagena, Spain

Prepare compressor and spare-part enquiries for Cartagena, Spain: yachts, zone air conditioning and machinery access, equipment identity and a confirmed receiver.

Read guide →

Spain · English

Barcelona

Prepare compressor and spare-part enquiries for Barcelona: refit, modified equipment and mounting constraints, equipment identity and a confirmed receiver.

Read guide →

Application guides

Provision cold rooms →Fish storage →Ship air conditioning →

I manage enquiries for multiple clients →

Product, vessel and port · Ferrol

Screw compressor for a vessel · Ferrol

Identify installed screw compressors and prepare enquiries for vessels, ports and shipyards.

For a screw compressor enquiry connected with Ferrol, define specification and integration for newbuilding. Engineering identifies equipment and accepts alternatives; purchasing retains references and quantities; the agent or workshop confirms receipt. These responsibilities can belong to different businesses and should remain distinct in the enquiry. For a documented project, link equipment to the approved list and record required documents before accepting an alternative.

Identify the installed assembly

Copy the complete nameplate and add serial number, refrigerant, circuit function and vessel tag. Separate provisions, fish preservation and accommodation cooling. For a part, link manufacturer code and drawing position to the destination model. For a complete assembly, provide dimensions, connections and access constraints. An incomplete reference or similar-looking machine may hide a different execution.

Motor, electrical supply and associated components

Check voltage, frequency, phases, connection and motor suffix against the onboard installation. The shore grid at the port does not determine these values. Keep original and proposed replacement references separate. State refrigerant, oil circuit, protection and accessories for review. A catalogue model is not by itself an engineering approval for the vessel.

References for equipment identification

CSH6553-35Y is a catalogue reference for identifying an existing unit and its information. Its page does not select the model for every vessel or establish equivalence with another compressor of similar power.

BITZER CSH6553-35Y

Plan receipt and the technical stop

In Ferrol, agree receiver, full address, named contact and required date before arranging transport. Material may arrive at a workshop, agent or warehouse while the vessel works elsewhere. Identify who accepts alternatives and whether partial supply is allowed for restoring operation before inventory items arrive. The offer confirms availability, packing, dispatch and scope; local stock and onboard delivery are not assumed.

Information to collect for the enquiry

Model, execution, serial number and destination circuit
Part reference, drawing position and quantity
Refrigerant and known operating conditions
Electrical nameplate and requested auxiliaries
Separate buyer, engineering contact and receiver
Confirmed address, date and documentation

Questions for this product family

Can I enquire about one spare part?: Yes. Provide destination model, reference or drawing position and photographs when the code is unknown. Applicability and availability are reviewed before supply is confirmed.
Are vessel and port names enough?: No. They help organise receipt but do not identify equipment. Keep the plate and technical scope with the receiving address and acceptance instructions.
Does the requested date guarantee delivery?: No. State the requirement and request commercial confirmation of availability, transport and receipt. A vessel-call date alone does not establish a confirmed handover.
What if connections or dimensions change?: The engineer reviews the modification and accepts the alternative. Retain that acceptance with the quoted execution before treating the product as a direct replacement.

Enquire about this installation →

Shell-and-tube condenser for a vessel · Ferrol

Identify a water-cooled condenser for a marine installation and prepare its port receiving requirements.

For a shell-and-tube condenser enquiry connected with Ferrol, define specification and integration for newbuilding. Engineering identifies equipment and accepts alternatives; purchasing retains references and quantities; the agent or workshop confirms receipt. These responsibilities can belong to different businesses and should remain distinct in the enquiry. For a documented project, link equipment to the approved list and record required documents before accepting an alternative.

Identify the installed assembly

Cooling water and execution

Identify direct seawater or an intermediate cooling-water loop. BITZER K-series documentation distinguishes standard-water and seawater-resistant executions. Retain the model suffix and request review of materials, connections and operating conditions for the exact model. A marine label does not replace that check or automatically select suitable capacity for the installation.

References for equipment identification

K1053H and K1053HB are different references; check which appears on the plate. Manufacturer documentation distinguishes their standard-water and seawater-resistant executions. They are not presented as automatic substitutes.

BITZER K1053H BITZER K1053HB

Plan receipt and the technical stop

Information to collect for the enquiry

Model, execution, serial number and destination circuit
Part reference, drawing position and quantity
Refrigerant and known operating conditions
Cooling-water medium, connections and documented materials
Separate buyer, engineering contact and receiver
Confirmed address, date and documentation

Questions for this product family

Can I enquire about one spare part?: Yes. Provide destination model, reference or drawing position and photographs when the code is unknown. Applicability and availability are reviewed before supply is confirmed.
Are vessel and port names enough?: No. They help organise receipt but do not identify equipment. Keep the plate and technical scope with the receiving address and acceptance instructions.
Does the requested date guarantee delivery?: No. State the requirement and request commercial confirmation of availability, transport and receipt. A vessel-call date alone does not establish a confirmed handover.
What if connections or dimensions change?: The engineer reviews the modification and accepts the alternative. Retain that acceptance with the quoted execution before treating the product as a direct replacement.

Enquire about this installation →

Marine refrigeration compressors and spare parts for Ferrol

Installed equipment and intervention scope

Spare parts, older models and alternatives

Condensers, electrical supply and documentation

Buyer, receiving point and required date

Details to prepare the supply

Browse the catalogue by brand

BITZER

DORIN

FRASCOLD

BOCK

Example reference pages for equipment identification

4CES-9Y

FX3

Frequently asked questions for buyers and chief engineers

Other marine buying guides

Vigo

Cartagena, Spain

Barcelona

Application guides

Product, vessel and port · Ferrol

Screw compressor for a vessel · Ferrol

Identify the installed assembly

Motor, electrical supply and associated components

References for equipment identification

Plan receipt and the technical stop

Information to collect for the enquiry

Questions for this product family

Shell-and-tube condenser for a vessel · Ferrol

Identify the installed assembly

Cooling water and execution

References for equipment identification

Plan receipt and the technical stop

Information to collect for the enquiry

Questions for this product family

Related guides